However, as some readers pointed out, the process of adding an IDE drive is significantly more difficult than a SATA drive, so in the interests of completeness and for those of you with old PCs, here is a complete tutorial for how to add a second IDE dr

In an ideal situation, a small amount of lubricant will silence the fan and restore full speed. However, if you’ve let the fan rattle for years, it’s likely that the bearing will have worn itself out and requires replacem

2. The cable length will affect your choice too, as IDE cables are usually quite short. If the CD-ROM is far from the hard drives, you will need one cable for the hard drives, and another going to the CD-

Operating systems generally are not a limitation when you are upgrading hardware, which is why the topic shows up last in this article. This doesn’t mean they are never an issue. It’s possible that you may find yourself with a hardware upgrade that is physically compatible with your system in every way but still doesn’t w

Have you ever got tired of cleaning out your PC’s dust bunnies? Or have a rattling fan that just ruins your concentration? Believe it or not, fixing both problems can cost just dollars and the results provide coolness, silence and easier maintena

I suggest electrical tape or the amazing, adhering substance known as duct-tape, to fasten the material in place. Pretty much any adhesive will do. However, you will probably want to avoid using extremely powerful rare earth magnets as fasten

Fan screens don’t cost very much and can attach to your computer quite easily. My two favorite types are the SilverStone magnetic filters and the StarTech filters. Simply measure your case’s intake vents horizontally or vertically and buy a matching size. For example, you will want to match a 120mm opening with a 120mm dust fil

IDE was a significant limiting factor in older PCs. Though modern machines will often include a single IDE connection for the sake of backwards compatibility, most machines from the IDE era of computing were equipped with two IDE sockets - each connection being referred to as an IDE "channel". On each channel, you could add up to 2 IDE devices - so that meant a maximum of 4 hard drives and/or CD-ROM dri

Since I only have a single IDE CD-ROM and single hard disk to show you today (as well as only a single physical IDE connector on my motherboard), I've opted to make the hard disk as Master and the CD-Drive as sl

Go to the BlueSoleil support site , download the drivers and extract the ZIP file. Run Setup.exe and follow any instructions that are displayed until the process is completed. Note that you will need to restart Windows in order to proceed. BlueSoleil requires a 19.99 Euro payment in order for you to use the software to its full capacity, but the evaluation terms are sufficient for trying it out. Additionally if the driver software shipped with your Bluetooth adaptor then you shouldn’t need to pay this charge or download anything else from their webs

Double-click Wiinremote.exe to proceed, where you will see a basic summary of the controls and the motion sensor. Note that without an IR receiver you will be unable to accurately use the Wiimote as a pointing device although the motion sensor does do a pretty good job of thi

On the motherboard end, the socket looks like this. On my fairly modern motherboard, the cable is actually colour coded so you know which end plugs where - but more than likely your old PC won't be, so you'll need to figure which end of the cable is longest and plug that into the board. There is a notch on one side of the connector to prevent you plugging it in the wrong way, so make sure you align t

Computers are complex, however, and this can lead to headaches when trying to upgrade. Nothing is more frustrating than finding out that you have a compatibility issue while you’re in the process of installing new Hardware Compatibility Guide|Https://Pcbuildinsight.Com/. Let’s review 4 potential trouble spots you should check before digging into your desktop’s intern

Once you’ve accounted for these four points you can safely purchase a hardware upgrade. Yes, I know – checking all of this can be a bit annoying and will take some extra time. But it does reduce the chance that you’ll buy incompatible hardware. It will also make you more familiar with your system and with computers in general, which means you’ll have less homework to do the next time you want to upgr

The difficult part is the jumper settings, which will vary according to your device. Basically, you're looking for something that mentions CS or Cable Select, as well as Master, and Slave. There will be a diagram somewhere. The digrams indicate which pins a jumper should connect. You should be able to remove a jumper with your finger nails, if not then use a pair of very small needle nose pliers and don't bend the p

Let's look at some standard IDE cables and connectors. There are 3 identical looking connectors - one at either end and one in the middle. However, one of the gaps between the end connectors and the middle connector is longer - this is the end that plugs into your motherbo